2-17-snyatie-opor-silovogo-agregata-na-avtomobile-s-dvigatelem-umpo-331.html
2.17. Removal of support of the power unit on the car with the engine UEPA-331We perform work on a viewing ditch or the elevator.
For dismantle of a pillow of the left forward support we enclose under the engine case pallet near a drain opening a wooden pro-rate and we substitute an adjustable support (or a jack).
For dismantle of a pillow of the right forward support we substitute an adjustable support (or a jack) under the right edge of the pallet of a case of the engine.
Operations on dismantle of pillows of forward support of the power unit are shown in the subsection "Removal of Support of the Power Unit on the Car with the VAZ-2106 Engine". For dismantle of a back support...
... we establish an adjustable support under a transmission case.
Key "on 13" we turn off a nut of a bolt of fastening of a pillow of a back support to a cross-piece, holding a bolt a key "on 12".
We take out a bolt and the expansion plug.
Similarly we take out the second bolt and its expansion plug.
Head "on 12" we turn off two bolts of fastening of a pillow of a back support to a transmission arm.
We remove a pillow of a back support.
If on a pillow there are cracks, gaps or peelings of rubber, replace a pillow new.
Removal of a cross-piece of a back support is shown in the subsection "Dismantling and Assembly of the Transmission".
We establish a pillow of a back support in the return sequence.
|