Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



20-21-snyatie-kozhukha-pola.html

20:21. Removal of a casing of a floor

By the crosswise screw-driver it is turned off two self-tapping screws of fastening of an overlay of a casing from above...

... and one sideways.

We remove an overlay of a casing.

Key "on 17" we turn off a bolt of fastening of the lock of the left seat belt.

We remove the lock of the left seat belt.

Similarly we remove the lock of the right seat belt.

We take out a box of a back ashtray.

The Shlitsevy screw-driver we unscrew the self-tapping screw of fastening of a casing to a floor.

We remove a gear shifting lever core cover with a frame.

We remove a floor casing.

We establish a floor casing in the return sequence, at the same time...

... three ledges of a casing of a floor have to enter the corresponding cuts in the lower part of the dashboard.


"previous page
20:20. Removal of the back panel of an upholstery of a luggage carrier
following page"
20:22. Removal of the dashboard