20-7-snyatie-perednego-kryla.html

20.7. Removal of a forward wing

We remove the side index of turn (see. "Removal of the side repeater of the index of turns"). We remove a front bumper (see. "Removal of a front bumper").

By the crosswise screw-driver it is turned off four self-tapping screws of fastening of the plastic flap to a wing...

... two self-tapping screws of fastening of the flap to a mudguard in a back part...

... and one in front.

We take out the flap.

The head "on 10" with the extender unscrewed one self-tapping screw through an opening of the side index of turn.

By the same tool it is turned off;

two self-tapping screws of fastening of an arm of a wing to a mudguard in front...

... one self-tapping screw of fastening of a wing around a threshold...

... and six self-tapping screws of the top fastening of a wing.

We remove a wing.

We establish a wing in the return sequence, previously having applied on wing prileganiye surfaces to a body anticorrosive mastic.