Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
22.1. Features of a design
22.2. Elements of system of production of the fulfilled gases
22.3. Removal of the shock-absorber of a back suspension bracket
22.4. Removal of a spring
22.5. Removal of a back lamp, replacement of lamps
22.6. Removal of plafonds of illumination of registration plate
22.7. Removal of a gas-filled emphasis of a door of a cap
22.8. Removal of the lock of a door of a cap and its drives
22.9. Removal of a door of a cap
22:10. Removal of a cap
22:11. Removal of boards of a body and their locks
23. Appendix
24. Care of a car body
 






b678569c



22-8-snyatie-zamka-dveri-kolpaka-i-ego-privodov.html

22.8. Removal of the lock of a door of a cap and its drives

For descriptive reasons operations are shown on the removed door.

Key "on 8" we turn off the bolt connecting parts of draft of the lock.

By the Shlitsevy screw-driver it is turned off four screws of fastening of the lock.

We remove the lock and we disconnect from it draft.

Passatizhami is taken out a latch.

By the Shlitsevy screw-driver it is turned off two screws of fastening of a level.

We remove a level.

We remove the dvuplechy lever with drafts from the shaft of the handle having square section.

By the Shlitsevy screw-driver it is turned off two screws of fastening of the handle.

We remove the handle, a pro-rate and laying.

We establish the removed elements in the return sequence.

The drive of locks is adjusted by the bolts connecting parts of drafts (are shown on a photo 1).


"previous page
22.7. Removal of a gas-filled emphasis of a door of a cap
following page"
22.9. Removal of a door of a cap