Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
4.1. Description of a design
4.2. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331
4.3. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine
4.4. Replacement of cooling liquid on the car with the engine UEPA-331
4.5. Replacement of cooling liquid on the car with the VAZ-2106 engine
4.6. Removal and check of the thermostat on the car with the engine UEPA-331
4.7. Removal and check of the thermostat on the car with the VAZ-2106 engine
4.8. Removal of a broad tank
4.9. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the engine UEPA-331
4.10. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the VAZ-2106 engine
4.11. Removal of the sensor of turning on of the electric fan on the car with the engine UEPA-331
4.12. Removal of the sensor of turning on of the electric fan on the car with the VAZ-2106 engine
4.13. Removal of the electric fan of the cooling system
4.14. Removal of a radiator on the car with the engine UEPA-331
4.15. Removal of a radiator on the car with the VAZ-2106 engine
4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331
4.17. Removal of a cover assembled the pump of cooling liquid on the car with the VAZ-2106 engine
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



4-2-regulirovka-natyazheniya-i-zamena-remnya-privoda-nasosa-okhlazhdayushhejj.html

4.2. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331

We check a tension of a belt on its deflection between pulleys of the generator and pump of cooling liquid.

At a normal tension of a belt its deflection under effort 40H (4 kgfs) has to make...

... 7-9 mm between pulleys of the pump and generator.

For a belt tension...

... a key "on 12" we weaken a bolt of fastening of the generator to an adjusting level.

The bolt of fastening of the generator to an adjusting level fixes also a tip of the wire of "weight" connecting the power unit and the accumulator.

Two keys "on 17" raskontrivay nuts of two bolts of the lower fastening of the generator.

Holding bolts from a provorachivaniye a key "on 14", we weaken nuts of the lower fastening of the generator a key "on 17".

We take away the generator from the block of cylinders of the engine and, having reached a nominal tension of a belt, we tighten a bolt of fastening of the generator to an adjusting level, and then we tighten also zakontrivay nuts of the lower fastening of the generator.

For removal of a belt we weaken fastenings of the generator...

... we shift the generator towards the block of cylinders of the engine...

... also we take off a belt from pulleys.

We establish the new or taken-off belt in the return sequence and we regulate its tension.


"previous page
4.1. Description of a design
following page"
4.3. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine