Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
4.1. Description of a design
4.2. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the engine UEPA-331
4.3. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine
4.4. Replacement of cooling liquid on the car with the engine UEPA-331
4.5. Replacement of cooling liquid on the car with the VAZ-2106 engine
4.6. Removal and check of the thermostat on the car with the engine UEPA-331
4.7. Removal and check of the thermostat on the car with the VAZ-2106 engine
4.8. Removal of a broad tank
4.9. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the engine UEPA-331
4.10. Replacement of the sensor of temperature of cooling liquid for a combination of devices on the car with the VAZ-2106 engine
4.11. Removal of the sensor of turning on of the electric fan on the car with the engine UEPA-331
4.12. Removal of the sensor of turning on of the electric fan on the car with the VAZ-2106 engine
4.13. Removal of the electric fan of the cooling system
4.14. Removal of a radiator on the car with the engine UEPA-331
4.15. Removal of a radiator on the car with the VAZ-2106 engine
4.16. Removal of the pump of cooling liquid on the car with the engine UEPA-331
4.17. Removal of a cover assembled the pump of cooling liquid on the car with the VAZ-2106 engine
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



4-4-zamena-okhlazhdayushhejj-zhidkosti-na-avtomobile-s-dvigatelem-umpo-331.html

4.4. Replacement of cooling liquid on the car with the engine UEPA-331

We perform work on the cold engine.

We remove an engine mudguard (see. "Removal of a mudguard of the engine").

We turn off a stopper of a broad tank. Having substituted suitable capacity...

... we turn off a stopper of the drain opening located in the lower part of the right tank of a radiator, and we merge liquid.

Connection is condensed with a rubber ring - do not lose it.

Head "on 14" we turn off an opening stopper for discharge of liquid from a shirt of cooling of the engine located in the block of cylinders near the ignition distributor.

We merge cooling liquid.

Upon termination of discharge of liquid we wrap traffic jams and we wash down liquid through a broad tank. We launch the engine and when falling level of liquid in a broad tank we add it. After a stop and cooling of the engine we check liquid level in a tank and if necessary we add it.


"previous page
4.3. Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid on the car with the VAZ-2106 engine
following page"
4.5. Replacement of cooling liquid on the car with the VAZ-2106 engine