Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
23.1. Diagnostics of malfunctions of the engine and its systems
23.2. Diagnostics of malfunctions of coupling
23.3. Diagnostics of malfunctions of the transmission
23.4. Diagnostics of malfunctions of cardan transfer, back bridge, running gear, steering and brake system
23.5. Diagnostics of malfunctions of a body
23.6. Diagnostics of malfunctions of the generator
23.7. Diagnostics of malfunctions of the rechargeable battery
23.8. Diagnostics of malfunctions of system of ignition
23.9. Diagnostics of malfunctions of a starter
23:10. Diagnostics of malfunctions of a washer of a windshield
23:11. Diagnostics of malfunctions of a screen wiper
23:12. Diagnostics of malfunctions of lighting and light alarm system
23:13. Diagnostics of malfunctions of control lamps and devices
23:14. Diagnostics of malfunctions of system of heating and ventilation
23:15. Moments of an inhaling of threaded connections
23:16. A specification for adjustments and control
23:17. The lamps applied on the car
23:18. The applied fuel, lubricants and operational liquids
24. Care of a car body
 






b678569c



23-16-osnovnye-dannye-dlya-regulirovok-i-kontrolya.html

23:16. A specification for adjustments and control

Thermal gaps in the drive of valves of engines UEPA-331 and VAZ-2106, mm:

0,15

Liquid temperature in the cooling system of the heated-up engine at the air temperature of 20-30 °C, full loading and the movement with a speed of 80 km/h, no more, than a °C

95

The minimum frequency of rotation of a bent shaft on the mode of idling, min.-1

750-800

Oil pressure in the engine lubrication system at a temperature of oil of 85 °C and frequency of rotation of bent shaft 5400 mines-1, MPa (kgf/cm2)

0,35-0,45 (3,5-4,5)

Level of cooling liquid in a broad tank on the cold engine

3-4 cm higher than a tag of "MIN"

Deflection of a belt of the drive of the pump of cooling liquid, mm: the engine UEPA-331 (at effort of 40 kgfs) the VAZ-2106 engine (at effort of 10,0 kgfs)

1-9 10-17

Gap between electrodes of a spark plug, mm: engine UEPA-331 VAZ-2106 engine

0,8-0,9 0,6-0,7

Initial corner of an advancing of ignition to VMT, a hail: engine UEPA-331 VAZ-2106 engine

10 5

Free wheeling of a pedal of the external end of a fork of switching off of coupling, mm

4,5-5,5

Free wheeling of a pedal of a brake at the idle engine, mm

3-5

Free wheeling of a steering wheel in provision of the movement on a straight line, a hail/mm, no more

5/18-20

Convergence of forward wheels, mm

1-3

Disorder of forward wheels, hail

0 °45 '±30'

Longitudinal inclination of an axis of turn of a wheel, hail

2 °30 '±30'

Pressure in tires, MPa (kgf/cm2): forward wheels of back wheels

0,21 (2,1) 0,19(1,9)

Minimum admissible thickness of overlays for blocks of forward and back brakes, mm

1,5

Liquid level in tanks of a hydraulic actuator of brakes and couplings

To the lower edges of jellied mouths

The maximum bias (dry solid soil) on which the car with full loading is kept unlimited time by the parking brake, %

23.

Course of the lever of the parking brake, teeth

4-5

Temperature began opening of the valve of the thermostat, a hail: TC103 (engine UEPA-331) of TC102 (VAZ-2106 engine)

80±3 82±3

Tension on generator conclusions with a frequency of rotation of a rotor of 3500 min.-1 supported by tension regulator at a temperature of 25±10' 'With and loading 16 A with the connected rechargeable battery, In

13,9-14,6

Gap between contacts of the breaker, mm: engine UEPA-331 VAZ-2106 engine

0,45±0,05 0,4±0,05

Thickness of a brake disk, mm, not less

11


"previous page
23:15. Moments of an inhaling of threaded connections
following page"
23:17. The lamps applied on the car