Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
22.1. Features of a design
22.2. Elements of system of production of the fulfilled gases
22.3. Removal of the shock-absorber of a back suspension bracket
22.4. Removal of a spring
22.5. Removal of a back lamp, replacement of lamps
22.6. Removal of plafonds of illumination of registration plate
22.7. Removal of a gas-filled emphasis of a door of a cap
22.8. Removal of the lock of a door of a cap and its drives
22.9. Removal of a door of a cap
22:10. Removal of a cap
22:11. Removal of boards of a body and their locks
23. Appendix
24. Care of a car body
 






b678569c



22-osobennosti-konstrukcii-avtomobilya-izh-2717.html

22. Features of a design of the IZh-2717 car

Differences in the Izh-2717 car design from the basic Izh-2126 model: 1 - driveshaft; 2 - fuel tank; 3 - body cap; And - a spring back suspension bracket; 5 - rear bumper; 6 - side board of a body; 7 - cap door; 8 - plafonds of illumination of registration plate; 9 - back lamps; 10-back shock-absorbers; 11 - back bridge; 12 - final system; 13 - back board of a body

Features of a design

The Izh-2717 car with a body the van is manufactured on the basis of the Izh-2126 car and intended for transportation of goods.

The car is unified with basic on power units, control systems and control, a forward suspension bracket and partially on transmission.

The fuel tank located under a cargo platform differs from the Izh-2126 car tank, but its removal, and also the device and works on dismantle of a fuel receiver are similar (see. "Removal of the fuel tank and fuel receiver").

Because of bigger base of the car systems of production of the fulfilled gases differ and cardan transfer — the Izh-2717 driveshaft is longer.

Longitudinal semielliptical springs are applied to increase in loading capacity in a back suspension bracket. The beam of the back bridge fastens to springs and therefore differs from the Izh-2126 car beam in places of fastening of elements of a back suspension bracket. The shock-absorber of a back suspension bracket fastens eyes via rubber plugs to a plate of step-ladders and to a body.

On the Izh-2717 car the back lighting devices differing from installed on cars with a body the hatchback are used. The cargo compartment of the Izh-2717 car is closed by a metal cap with a door.


"previous page
21.7. Removal of an air duct of air supply in a back part of salon
following page"
22.1. Features of a design