Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
8.1. Description of a design
8.2. Replacement of spark plugs
8.3. Removal of a cover of the distributor of ignition
8.4. Removal of a rotor of the distributor of ignition
8.5. Ignition distributor lubricant
8.6. Adjustment of the moment of ignition
8.7. Check and adjustment of a gap between contacts of the breaker
8.8. Removal of the distributor of ignition
8.9. Dismantling of the distributor of ignition
8.10. Removal of the coil of ignition
8.11. Councils of skilled
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



8-11-sovety-byvalykh.html

8.11. Councils of skilled

Search of "spark" without assistant

In the course of repair quite often there is a need "to find" a spark. On the car with contact system of ignition it can be made without assistant. Uncover the distributor and take out from it the central high-voltage wire. Include ignition. Rest a sting of the screw-driver against mobile ("plus") contact. If contacts are closed, then several times an otverka open them. If are opened — periodically concern a core of the weights screw-driver (it is admissible, the distributor roller). Generally, the task comes down to simulating operation of the breaker. At the same time in serviceable system between the central wire and "weight" the spark has to appear.

Road repair of a rotor of the distributor

If in way high voltage punched a distributor rotor, it is possible to act this way. Having unscrewed two screws, we remove a rotor and, having put the plastic bag folded double on the centrifugal automatic machine, we put back. Then, having cut off speakers from under a rotor pieces of polyethylene, we fix a distributor cover.


"previous page
8.10. Removal of the coil of ignition
following page"
9. System of production of the fulfilled gases