Service of IZh 2126
	1. General information
	2. Engine UEPA-331
	3. VAZ-2106 engine
	4. Cooling system
	5. Power supply system
	6. Carburetor
	7. System of ignition of the engine UEPA-331
	8. System of ignition of the VAZ-2106 engine
	9. System of production of the fulfilled gases
	10. Coupling
	11. IZh-2126 transmission
	12. VAZ-21074 transmission
	13. Cardan transfer
	14. Zadny Bridge
	15. Forward suspension bracket
	16. Back suspension bracket
	17. Steering
	18. Brake system
	19. Electric equipment
		19.1. General information
		19.2. Replacement of safety locks and relay
		19.3. Removal of the assembly block
		19.4. Zazhikaniye switch
		19.5. Removal of the switch of ignition
		19.6. Rechargeable battery
		19.7. Cooling system fan electric motor
		19.8. Generator
		19.9. Starter
		19:10. Headlights
		19:11. Understeering switch
		19:12. Sound signal
		19:13. Cleaner and washer of a windshield
		19:14. Back door glass heating system
		19:15. Control devices
			19.15.1. Check of control devices and their sensors
			19.15.2. Removal of a flexible shaft of the drive of a speedometer
			19.15.3. Removal of a combination of devices
		19:16. Control system of the economizer of compulsory idling (ECI)
	20. Body
	21. System of ventilation and heating
	22. Features of a design of the IZh-2717 car
	23. Appendix
	24. Care of a car body

19-15-2-snyatie-gibkogo-vala-privoda-spidometra.html

19.15.2. Removal of a flexible shaft of the drive of a speedometer

We perform work on a viewing ditch or the elevator.

We turn off a cap nut of a flexible shaft of the drive of a speedometer...

... also we take out a flexible shaft from the speedometer drive.

We take away a combination of devices up (see. "Removal of a combination of devices").

We turn off a cap nut...

... also we bring a flexible shaft of a speedometer out of its nest.

We extend a flexible shaft in salon. At installation of a new flexible shaft we do not allow its excesses with a radius less than 100 mm.