19.16.3. Removal of the microswitch
We remove the case of the air filter (see. "Removal of the case of the air filter").
We disconnect wires from microswitch conclusions.
By the Shlitsevy screw-driver it is turned off two screws of fastening of the microswitch to a carburetor arm.
We remove the microswitch.
We install the new microswitch on an arm of the carburetor and we regulate its situation, without tightening fixing screws.
We displace the microswitch case along an oval cut before click a rychazhka (disconnection of contacts).
In this situation we tighten screws of fastening of the microswitch and we connect to its conclusions wires (in any order).