Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
19.1. General information
19.2. Replacement of safety locks and relay
19.3. Removal of the assembly block
19.4. Zazhikaniye switch
19.5. Removal of the switch of ignition
19.6. Rechargeable battery
19.7. Cooling system fan electric motor
19.8. Generator
19.9. Starter
19:10. Headlights
19:11. Understeering switch
19:12. Sound signal
19:13. Cleaner and washer of a windshield
19:14. Back door glass heating system
19:15. Control devices
19:16. Control system of the economizer of compulsory idling (ECI)
19.16.1. Removal of the electropneumatic valve
19.16.2. Removal of the control unit
19.16.3. Removal of the microswitch
19.16.4. Councils of skilled
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



19-16-4-sovety-byvalykh.html

19.16.4. Councils of skilled

How to turn off a nut of fastening of a pulley

When dismantling the generator it is required to turn off the nut holding a pulley on the end of a shaft of a rotor. When the generator is removed, to execute this operation it appears absolutely not simply as the nut is tightened quite strongly.

It is safe to record a pulley it is possible so. Reel up two-three rounds of a strong cord with a diameter of 5-8 mm on a stream of a pulley, pull it and fix the ends on the generator case (for example, for a hairpin or fixing eyes).

Now at a nut otvorachivaniye the cord will drag on and will hold a pulley from turn.


"previous page
19.16.3. Removal of the microswitch
following page"
20. Body