Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
21.1. Description of a design
21.2. Removal of the crane of a heater
21.3. Removal of the airsupercharger and fan of a heater
21.4. Removal of the additional resistor of the fan of a heater
21.5. Removal of a radiator of a heater
21.6. Removal of the case of a heater, control unit of a heater and air ducts of the dashboard
21.7. Removal of an air duct of air supply in a back part of salon
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



21-5-snyatie-radiatora-otopitelya.html

21.5. Removal of a radiator of a heater

The radiator of a heater can be dismantled, without removing the heater case. We remove the lower part of the dashboard (see. "Removal of the dashboard").

We merge cooling liquid from the engine.

In interior of the car on the right side of the heater case...

... passatizham we weaken a collar of the bringing heater hose.

We weaken a collar of the taking-away heater hose.

We remove both hoses from heater radiator branch pipes.

By the crosswise screw-driver it is turned off two self-tapping screws of fastening of a clamping level of a radiator otopitey.

We remove a clamping level.

We remove a radiator to the right...

... also we take out it from the heater case.

For removal of a branch pipe...

... a key "on 8" we turn off two nuts.

We remove a branch pipe...

... and rubber laying.

Similarly we remove other branch pipe.

We establish a radiator in the return sequence, having replaced porolonovy a sealant.


"previous page
21.4. Removal of the additional resistor of the fan of a heater
following page"
21.6. Removal of the case of a heater, control unit of a heater and air ducts of the dashboard