5.10. Removal of a cable of the drive of the air gate of the carburetor
We remove the case of the air filter (see. "Removal of the case of the air filter").
Holding a key "on 7" a lug of the lever of the drive of the air gate of the carburetor, the shlitsevy screw-driver we unscrew the screw fixing a cable.
Key "on 8" we weaken a bolt of fastening of the level holding a cable cover.
We take out a cable from an opening in a lever lug.
In salon by the crosswise screw-driver it is turned off two self-tapping screws of fastening of the panel of the control unit to the lower part of the dashboard.
Having turned the panel, by passatizha it is hooked a locking bracket of a tip of a cable.
We remove a locking bracket.
We stretch a cable through openings of a body and the panel of the control unit.
We remove a cable.
We establish a cable in the return sequence. At completely "drowned" handle the air gate has to be completely open. If necessary we adjust the drive movement of a cable at the weakened screw of its fastening.