Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
17.1. Description of a design
17.2. Adjustment of the steering mechanism
17.3. Removal of a steering wheel
17.4. Removal of a steering column
17.5. Removal of the lower cardan hinge
17.6. Removal of an external tip of steering draft
17.7. Replacement of a cover of a lath
17.8. Removal of the steering mechanism
17.9. Dismantling of the steering mechanism
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



17-8-snyatie-rulevogo-mekhanizma.html

17.8. Removal of the steering mechanism

The steering mechanism is removed for repair or replacement of its details. We perform work on a viewing ditch or the elevator.

We disconnect both tips of steering drafts from levers of rotary fists (see. "Removal of an external tip of steering draft"). We weaken a bolt of fastening of the lower cardan hinge to an intermediate shaft, we take out a bolt of fastening of the hinge to a shaft of a gear wheel of the steering mechanism and we remove the lower cardan hinge from a gear wheel shaft (see. "Removal of the lower cardan hinge").

Cap key "on 17" we turn off a nut of a bolt of the left fastening of a case of the steering mechanism to a stretcher, holding a bolt from a provorachivaniye a head "on 14".

We beat out a bolt the hammer through a drift from soft metal...

... also we take out a bolt.

Similarly we dismantle a bolt of the right fastening of a case of the steering mechanism to a stretcher.

We remove the steering mechanism together with steering drafts.

We install the steering mechanism in the return sequence, we regulate the angles of installation of wheels and we focus a steering wheel (see. "Removal of a steering wheel").


"previous page
17.7. Replacement of a cover of a lath
following page"
17.9. Dismantling of the steering mechanism