Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
19.1. General information
19.2. Replacement of safety locks and relay
19.3. Removal of the assembly block
19.4. Zazhikaniye switch
19.5. Removal of the switch of ignition
19.6. Rechargeable battery
19.7. Cooling system fan electric motor
19.8. Generator
19.9. Starter
19:10. Headlights
19.10.1. Removal and dismantling of a block headlight, replacement of lamps
19.10.2. Electromechanical proofreader of headlights
19.10.3. Adjustment of headlights
19.10.4. Removal of the side repeater of the index of turns
19.10.5. Replacement of the switch of lamps of a backing
19.10.6. Removal of a back lamp, replacement of lamps
19.10.7. Removal of a plafond of illumination of registration plate, replacement of a lamp
19.10.8. Removal of a plafond of illumination of a luggage carrier
19.10.9. Removal of a plafond of illumination of salon, replacement of a lamp
19.10.10. Cooling system fan electric motor
19:11. Understeering switch
19:12. Sound signal
19:13. Cleaner and washer of a windshield
19:14. Back door glass heating system
19:15. Control devices
19:16. Control system of the economizer of compulsory idling (ECI)
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 









b678569c


19-10-1-snyatie-i-razborka-blok-fary-zamena-lamp.html

19.10.1. Removal and dismantling of a block headlight, replacement of lamps

We turn a block headlight cover counterclockwise and we remove it.

We disconnect a block of wires from lamp plugs.

Having squeezed two short moustaches of a wire clamp...

... we take out a lamp.

The lamp, new or suitable for further use, should be taken hands only for a socle, but not for a flask.

We take out a cartridge of a lamp of dimensional light.

Having pressed a lamp and having turned it counterclockwise...

... we take out a lamp from the boss.

Through a window in a mudguard of a body we take out a cartridge of a lamp of the index of turns, having turned it counterclockwise.

We take out a lamp, having pressed it and having turned counterclockwise.

For removal of a block headlight...

... we disconnect blocks of plaits of wires from the executive mechanism of the electroproofreader...

... and also from the headlight case. We take out a cartridge of a lamp of the index of turns, as shown in a photo 5.

Head "on 10" we turn off four nuts of fastening of a block headlight.

We take out a block headlight.

By the Shlitsevy screw-driver it is turned off two screws of fastening of the case of the index of turns to the headlight case.

We bring pads of the case of the index of turns out of headlight case grooves...

... also we remove the case of the index of turns.


"previous page
19:10. Headlights
following page"
19.10.2. Electromechanical proofreader of headlights