Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
19.1. General information
19.2. Replacement of safety locks and relay
19.3. Removal of the assembly block
19.4. Zazhikaniye switch
19.5. Removal of the switch of ignition
19.6. Rechargeable battery
19.7. Cooling system fan electric motor
19.8. Generator
19.9. Starter
19:10. Headlights
19.10.1. Removal and dismantling of a block headlight, replacement of lamps
19.10.2. Electromechanical proofreader of headlights
19.10.3. Adjustment of headlights
19.10.4. Removal of the side repeater of the index of turns
19.10.5. Replacement of the switch of lamps of a backing
19.10.6. Removal of a back lamp, replacement of lamps
19.10.7. Removal of a plafond of illumination of registration plate, replacement of a lamp
19.10.8. Removal of a plafond of illumination of a luggage carrier
19.10.9. Removal of a plafond of illumination of salon, replacement of a lamp
19.10.10. Cooling system fan electric motor
19:11. Understeering switch
19:12. Sound signal
19:13. Cleaner and washer of a windshield
19:14. Back door glass heating system
19:15. Control devices
19:16. Control system of the economizer of compulsory idling (ECI)
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 









b678569c


19-10-7-snyatie-plafona-osveshheniya-nomernogo-znaka-zamena-lampy.html

19.10.7. Removal of a plafond of illumination of registration plate, replacement of a lamp

We uncover a back lamp and a cover of the back panel of an upholstery of a luggage carrier (see. "Removal of the back panel of an upholstery of a luggage carrier").

We turn off a plastic nut of fastening of a plafond of illumination of registration plate...

... also we remove a plafond.

The plafond of a back lamp fastens to the body panel through rubber laying.

By the crosswise screw-driver it is turned off two self-tapping screws...

... also we uncover a plafond.

We replace a lamp.

We establish new Pampas and a plafond in the return sequence.


"previous page
19.10.6. Removal of a back lamp, replacement of lamps
following page"
19.10.8. Removal of a plafond of illumination of a luggage carrier