Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



20-12-snyatie-zamka-i-ruchek-dveri.html

20:12. Removal of the lock and handles of a door

We remove a door upholstery (see. "Removal of an upholstery of a door").

For removal of the switch of the lock...

... shlitsevo by the screw-driver it is disconnected from it draft of switching off...

... by passatizha it is hooked a lock bracket...

... also we remove it.

We remove the switch of the lock and its laying.

Head "on 10" we turn off four bolts of fastening of the internal handle of a door.

We disconnect a button pusher from the lever of the external drive (the dismantled knot is for descriptive reasons shown).

We remove an external part of the lock (see. "Replacement of an external part of the lock of a door").

We squeeze clamps of a plastic collar of fastening of draft and we remove it.

We bring an internal part of the lock to a window of the internal panel of a door...

... and the shlitsevy screw-driver we disconnect a draft clamp.

We take out from a door an internal part of the lock and the internal handle with draft.

Head "on 10" through two windows in the top back part of a door we turn off two bolts of fastening of the external handle.

We remove the external handle with a button pusher.

Having taken out a button pusher...

... we separate parts of the external handle.

We put an internal part of the lock and handle of a door in the return sequence.


"previous page
20:11. Removal of an upholstery of a door
following page"
20:13. Door glass removal