Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
20.1. Description of a design
20.2. Removal of a front grille
20.3. Removal of the lock of a cowl
20.4. Removal of a cowl
20.5. Removal of a mudguard of the engine
20.6. Removal of a front bumper
20.7. Removal of a forward wing
20.8. Replacement of a windshield
20.9. Removal of an external rear-view mirror
20:10. Replacement of an external part of the lock of a door
20:11. Removal of an upholstery of a door
20:12. Removal of the lock and handles of a door
20:13. Door glass removal
20:14. Removal of the mechanism of a window regulator
20:15. Removal of a door and adjustment of provision of a door in an aperture
20:16. Removal of a rear bumper
20:17. Removal of a gas-filled emphasis of a door of a back
20:18. Removal of the lock of a door of a back
20:19. Removal of a door of a back
20:20. Removal of the back panel of an upholstery of a luggage carrier
20:21. Removal of a casing of a floor
20:22. Removal of the dashboard
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



20-8-zamena-vetrovogo-stekla.html

20.8. Replacement of a windshield

To take the damaged windshield, we remove the dashboard (see. "Removal of the dashboard"), leads of screen wipers and an overlay of forward racks, we fill sealant edges for a flange of an aperture of a body and, pressing the top corners of glass, we squeeze out it outside. At the same time the assistant has to support glass outside.

We examine and, if necessary, we replace a sealant with new.

Establishing a windshield, we wash out water grooves of a sealant and we blow compressed air.

We put on a sealant a windshield.

We grease a sealant groove with soap solution.

We insert into the first (from salon) a sealant groove a cord so...

... that the ends of a cord laid down with an overlap in the lower part of glass.

We put glass in an aperture so that the ends of a cord appeared in salon. The assistant presses glass to an aperture.

Extending a cord...

... we draw edge of a sealant through an aperture edge.

We make replacement of glasses of a door of a back and sidewalls similarly.


"previous page
20.7. Removal of a forward wing
following page"
20.9. Removal of an external rear-view mirror