4-15-snyatie-radiatora-na-avtomobile-s-dvigatelem-vaz-2106.html

4.15. Removal of a radiator on the car with the VAZ-2106 engine

We perform work on the cold engine.

We merge cooling liquid (see. "Replacement of cooling liquid on the car with the VAZ-2106 engine").

We disconnect a block of a plait of wires of power supply of the electric fan of the cooling system (see. "Removal of the electric fan of the cooling system") and wires from the sensor of turning on of the electric fan (see. "Removal of the sensor of turning on of the electric fan on the car with the VAZ-2106 engine").

The radiator can be dismantled together with the electric fan and its casing, or previously having removed the electric fan and a casing (see. "Removal of the electric fan of the cooling system"). Operations on dismantle of a radiator are shown at the removed electric fan casing.

We weaken a collar of fastening of a steam discharge tube to a radiator branch pipe...

... and it is careful not to break off the plastic union of a radiator, we disconnect from it a tube.

We weaken the screw of a collar of fastening of the top (bringing) radiator hose...

... also we remove a hose from a radiator branch pipe.

We weaken the screw of a collar of fastening of the lower (taking-away) radiator hose...

... and also we remove a hose from a radiator branch pipe.

We take out a radiator.

Will screw the union of the hose connecting a radiator and a broad tank in a carving opening of the left tank of a radiator. If necessary...

... a key "on 17" we unscrew the union...

... also we take out it together with a rubber sealing ring.

Do not lose rubber plugs of the lower fastenings of a radiator...

... which at installation of a radiator enter openings of the arms fixed on the lower cross-piece of a front of a body.

We establish a radiator in the return sequence, trying not to damage its plates about a detail of the engine and a body. We fill system with cooling liquid.