Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
3.1. Description of a design
3.2. Oil replacement
3.3. Replacement of laying of a cover of a head of the block of cylinders
3.4. Check and adjustment of thermal gaps in the drive of valves
3.5. Adjustment of a tension of a chain of the drive of the camshaft
3.6. Removal of an uspokoitel of a chain of the drive of the camshaft
3.7. Removal of a natyazhitel of a chain of the drive of the camshaft
3.8. Removal of the camshaft and levers of the drive of valves
3.9. Replacement of maslootrazhatelny caps of the mechanism of gas distribution
3.10. Replacement of a forward epiploon of a bent shaft
3.11. Replacement of a back epiploon of a bent shaft
3.12. Removal of a gear wheel of the drive of the oil pump
3.13. Removal of a chain and asterisks of the drive of the camshaft
3.14. Removal of the roller of the drive of auxiliary units
3.15. Replacement of laying of an inlet pipe and final collector
3.16. Removal and dismantling of a head of the block of cylinders
3.17. Removal of the sensor of pressure of oil
3.18. Removal of an oil separator of system of ventilation of a case
3.19. Removal of support of the power unit on the car with the VAZ-2106 engine
3.20. Replacement of laying of the pallet of a case
3.21. Removal of the oil pump
3.22. Dismantling of the oil pump
3.23. Dismantle of conrod and piston group on the car
3.24. Removal of the engine from the car
3.25. Dismantling and assembly of the engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



3-22-razborka-maslyanogo-nasosa.html

3.22. Dismantling of the oil pump

We remove the oil pump (cm "Removal of the oil pump")

Cap key "on 10" we turn off three bolts of fastenings of a reception branch pipe to the case of the oil pump.

We remove a reception branch pipe with the reducing valve.

We take out the reducing valve from a branch pipe...

... valve spring...

... and persistent washer.

We uncover the pump.

We remove from an axis in the case the conducted pump gear wheel.

... also we take out the leading gear wheel with the drive roller.

We wash out pump details in gasoline or kerosene and we blow compressed air. In the presence of cracks, zadir and strong wear of the case, a cover and gear wheels we replace the pump. We examine the reducing valve: on its working surfaces there should not be забоин also agnails which can lead to pressure decrease of oil in the engine lubrication system.

We oil pump details engine and we assemble the pump in the return sequence. After assembly we turn a hand the leading roller of the pump: gear wheels have to rotate easily, smoothly and without jammings.


"previous page
3.21. Removal of the oil pump
following page"
3.23. Dismantle of conrod and piston group on the car