Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
19.1. General information
19.2. Replacement of safety locks and relay
19.3. Removal of the assembly block
19.4. Zazhikaniye switch
19.5. Removal of the switch of ignition
19.6. Rechargeable battery
19.7. Cooling system fan electric motor
19.8. Generator
19.8.1. Description of a design
19.8.2. Check of the generator
19.8.3. Removal of brush knot and regulator of tension of the generator 58.3701
19.8.4. Removal and dismantling of the generator 58.3701
19.8.5. Removal of the regulator of tension and brush knot of the generator 37.3701
19.8.6. Removal and dismantling of the generator 37.3701
19.9. Starter
19:10. Headlights
19:11. Understeering switch
19:12. Sound signal
19:13. Cleaner and washer of a windshield
19:14. Back door glass heating system
19:15. Control devices
19:16. Control system of the economizer of compulsory idling (ECI)
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



19-8-3-snyatie-shhetochnogo-uzla-i-regulyatora-napryazheniya-generatora-58-3701.html

19.8.3. Removal of brush knot and regulator of tension of the generator 58.3701

Work can be performed, without removing the generator from the car.

We disconnect a wire of "weight" from the rechargeable battery.

We disconnect a wire from conclusion "Ш" of the generator.

Key "on 6" we turn off two bolts of fastening of a cover of brush knot and the regulator of tension to the generator case.

We uncover, brush knot and the regulator of tension assembled.

By the Shlitsevy screw-driver it is turned off two screws of fastening of brush knot to a cover.

We remove brush knot...

... also we take out tension regulator from a cover.

We establish details in the return sequence.


"previous page
19.8.2. Check of the generator
following page"
19.8.4. Removal and dismantling of the generator 58.3701