2-15-snyatie-vypusknogo-kollektora.html

2.15. Removal of a final collector

We disconnect an arm of fastening of a reception pipe to the transmission and, having turned off nuts of fastening of a reception pipe to a final collector, we shift a flange of a reception pipe from hairpins of a final collector (see. "Removal of a reception pipe on the car with the engine UEPA-331").

We remove a corrugated hose of air intake to the case of the air filter from an air inlet branch pipe.

Cap key "on 13" we turn off one nut of fastening of an air inlet to a rack, navernuty on a hairpin of fastening of a final collector...

... and two nuts serving at the same time for fastening of a final collector to a head of the block of cylinders.

We remove an air inlet.

Key "on 14" we turn off a rack of fastening of an air inlet...

... also we remove it.

Cap key "on 13" we turn off other five nuts of fastening of a final collector...

... also we remove it.

We remove four sealing laying of branch pipes of a final collector.

Laying should be established only in one situation - ledges up and to a forward part of the engine.

We establish a final collector in the return sequence.