Natyazhitel chains is removed in case of its malfunction: adjustment of a tension of a chain does not yield result because of loss of mobility of a plunger, breakage or decrease in rigidity of a spring of a natyazhitel.
Cap key "on 12" we turn off a lock bolt of a natyazhitel.
We take out a bolt.
Hexagon "on 12" we turn off the stopper located in inflow of the top cover of the drive of the camshaft.
In the absence of a hexagon we turn off a high nut of fastening of the distributor of ignition (trying not to turn the distributor that the ignition advancing corner did not change)...
... and, having inserted it into a stopper, a cap key "on 12" we rotate a nut and we turn off a stopper.
Under a stopper there is a spring in the loaded state. Therefore, turning off a stopper, on the last rounds of a carving we hold it that the spring did not "shoot".
We remove a stopper with laying.
... also we take a spring.
By tweezers it is taken out a clamping plate of a plunger...
... and a plunger.
Mechanism of a natyazhitel of a chain.
We clear a plunger of a deposit and we oil engine. We insert it together with a clamping plate into a nest of the top cover of the drive of the camshaft so that the opening in a clamping plate coincided with an opening in a cover under a lock bolt. We roll a lock bolt so that its shaft entered an opening of a clamping plate. We insert a spring into a plunger. Pressing a hexagon on a stopper and overcoming effort of a spring, we wrap a stopper. Having turned a bent shaft of the engine in the direction of its rotation on 2-3 turns, we tighten a lock bolt.