2-10-zamena-zadnego-salnika-kolenchatogo-vala.html

2.10. Replacement of a back epiploon of a bent shaft

We perform work on a viewing ditch or the elevator.

We remove a casing and the conducted clutch plate (see. "Replacement of a casing and the conducted clutch plate on the car with the engine UEPA-331").

To small beards we unbend the ends of lock plates from heads of bolts of fastening of a flywheel to a bent shaft.

Head "on 17" we turn off six bolts of fastening of a flywheel, holding a flywheel from a provorachivaniye the assembly shovel implanted between teeths of a wreath and leaning on a hairpin of fastening of the transmission.

We remove a flywheel.

The screw-driver we hook an epiploon and we take it from a cover.

Having oiled a working edge of a new epiploon engine, we press it through a suitable piece of a pipe or we use an old epiploon as a mandrel. We grease bolts of fastening of a flywheel with sealant and we tighten them the ordered moment (see. "Appendix"). We establish the removed details and knots in the return sequence.